How to install Cydia for iOS 8.4 – 8.1.3 with TaiG jailbreak?

This is the complete tutorial for Windows users how to jailbreak iOS 8.4 using untethered TaiG jailbreak. All iPhone, iPad or iPod devices are running iOS 8.4 – iOS 8.1.3 welcome to jailbreak & install Cydia with simple steps. just follow the instructions are given below to success..

Mac user guides here :

  1. How to install Cydia for iOS 8.4 – 8.1.3 with TaiG jailbreak on Mac?
  2. How to install Cydia for iOS 8.4 – 8.1.3 with PP jailbreak on Mac?

Untitled-13

About TaiG iOS 8.4 jailbreak

  • Latest Versions : TaiG V2.4.5 for Windows (25.12.2015) / TaiG V1.1.0 for Mac
  • Release date : 01st July 2015
  • Cydia version : Integrates latest Cydia installer 1.1.23
  • Supporting firmware : iOS 8.4, iOS 8.3,  iOS 8.2, iOS 8.1.3
  • Type of jailbreak : Untethered jailbreak
  • Computer platform support : Windows/Mac

TaiG supports devices

  • iPhone 4S, 5, 5C, 5S, 6, 6 Plus
  • iPad 2, 3, 4, Air, Air 2, Mini, Mini 2, Mini 3
  • iPod Touch 5, 6

Requirements for TaiG jailbreak

  • A Windows running computer with installed iTunes
  • USB cable to connect your device with computer
  • iOS 8.4, 8.3, 8.2 or iOS 8.1.3 running iPhone, iPad or iPod

Important instructions before start jailbreak

  • Upgrade you idevice to latest iOS version with iTunes [Do not use OTA method]
  • Please fully backup your data before jailbreak.
  • Turn off passcode (go to Settings > Passcode > Enter your passcode > Turn Passcode Off > Enter your passcode)
  • Turn off Find My iPhone (go to Settings > iCloud > Find My iPhone > Click to turn off)
  • Disable Anti-virus programs on your iDevice as well as the computer.

New* Download TaiG Jailbreak V2.4.5

How to jailbreak iOS 8.4 – 8.1.3 with TaiG ?

Step 01 >> Backup your data using iTunes

Step 02 >> Download latest version of TaiG jailbreak tool on your computer from above links & extract.

Step 03 >> Connect your iOS device to computer with USB cable.

Step 04 >> Right click on the extracted file & select “Run as administrator” for launch the program.Untitled-14Step 05 >> Then, the Program will detect your device & shows your device’s firmware on the window. Uncheck the “3K Assistant 2.3.0″ check-box to prevent installing Chinese app store.

Step 06 >> Click “Start” to begin jailbreak. Keep your device well connected and wait patiently. Just ignore If you see storage full errors.

Step 07 >> Once the jailbreak completes, you will be shown “jailbreak succeeded” massage. Congratulation! all are done without any errors. Then, your idevice will reboot and you can see Cydia app on your Homescreen.

Troubleshooting :
Recommend for you :
You may also interest :
Tagged with: , , , , ,

143 Comments on “How to install Cydia for iOS 8.4 – 8.1.3 with TaiG jailbreak?

  1. I followed the steps properly
    But taiG jailbreak tool could not find my divice or my drive.
    So what can I do?
    Please help me
    Thank you

  2. Good afternoon!
    Iphone 5s phone firmware 8.4 Taig 2.2.1
    Jailbreak is fast, but 90% of the phone says that “memory is full” and writes Efshp 2.2.1 Jailbreak okay successful
    but the phone goes into a reboot and not charged, to have restores,
    and so 11 times in a row with different firmware on different computers with different cords.
    I will be glad for the advice! Sincerely, Ivan
    P.S. both his iPad hacked in 5 minutes … and the phone does not give up…

  3. I have iphone5,i cannot install TaiGJBreak_EN_2200.exe.
    Itune is alredy installed in my pc.
    Kindly advise me.

  4. I followed the steps properly
    But taiG jailbreak tool could not find my divice or my drive.
    So what can I do?
    Please help me

  5. i tried to jailbreak an iPhone 5, and it gets to 60% and is trying to restart the idevice, but the device won’t respond and won’t restart. but when i tried the iPhone 5c it all worked fine.

  6. I did the jailbreak for 8.4 on my iPhone 5c and it worked perfectly.

    Then I tried to do it on my iPhone 5 and it’s not working I get the 1105 error and I disable the antivirus, defender and turn off the “Find My iPhone” but it still doesn’t work. It gets stuck on 60% and does restart the phone and/or it fails after injection.

    • It is impossible. Without jailbreak you can get something like only Cydia demo. If you want real working Cydia, there is no any other way unless jailbreaking.

    • Follow post and download TaiG 2.3.1 – TaiG direct download link you can see middle of the page

    • What’s your problem? We can help you. Cydia now can get all idevices running any iOS versions.

      • I am not able to install CYdia on my Iphone5s even though i have downloaded the link and tried to run as Admin but it says to install latest itunes though i have the latest one. Please advise.

        • Follow instructions properly, Disable Find My iPhone, Antivirus and run as admin again. Same error occur again – reboot your device and restart computer

  7. hi i done with installation but getting error that webpage is not avvailable.. And i want to know is there any way to unclock my carrier using jb or cydia i am using i phone 6plus . which is locked by t mobiles

  8. I am having error code -1105 iPhone 5c IOS 8.4 I have find iPhone off & passcode off and antivirus off using Taig v2.3.1, not sure what’s going on? I used JB on iOS 8.3 Taig 2.2 and worked just fine

    • Pls disable Antivirus, Firewalls, Turn Off Find my iPhone. Reboot your device and machine, Then use TaiG 2.3.1 to jailbreak your device again.

  9. So I turned off my iPhone restarted my iPhone I turned off my security restarted my computer and then try to jailbreak as you said and it still doesn’t go past 20% and it’s almost like an infinite loop it says start data processing

  10. Hello, I tried install jailbreak 2.3.0 and 2.4.1 but my device wasn’t found. Im using the latest version of itunes an windows 7. I followed steps do disable codes, antivirus an find location……so what could be a problem?

  11. I get this error when I run TaiG Jailbreak V2.4.3

    Apple driver hasn’t been found. Please download and install iTunes.

    I am running iTunes 12.2.1

    • TaiG download link is on the middle of the article. Please don’t forget, you only can download TaiG using a computer & cannot download it with your iOS device.

  12. I jailbreaked my ios8.4 ipad2 with TaiG 2.4.3 and got a final ‘Jailbreak Succeeded’ message, BUT… there is NO Cydia icon !!!
    Please HELP !

    • During the jailbreak process Cydia will automatically install on your computer. Therefore you just only follow proper jailbreak procedure to get Cydia on your device.

  13. I recently jailbreak my iphone 4s using TaiG and jailbreak succeded, but when i open cydia it says like, cydia will exit when it will complete ( not the exact words but alike meanings), and after that every icons of every apps expect cydia and 2 games disappeared, dont know what happend to it, its now like a useless phone because no phone settings messaging icons so nothing…..please help me out how can i fix it….
    Thanks…Help will b highly appreciated…

    • Pls install UIKit Tools update from Cydia. Follow these steps

      1. Launch Cydia or Refresh it
      2. You should get “Essential Upgrade
      3. Tap Complete Upgrade

  14. Hi,
    my iPAD2 is already JB but it is in version IOS8.1.2.
    If I update to IOS8.4 and JB, will I have to reinstall all Cydia programs? Is there a way to overcome this?
    BR,
    Paulo

    • Jailbreak does not need any password. If you have entered iCloud password, You need to enter Password to access iCloud

Leave a Reply to esteban Cancel reply

Your email address will not be published. Required fields are marked *

*